“A Comparative Study of

Architecture Description language (ADLs)&;,

This paper describes the design and fabrication of an intelligent gate system that allows only certain vehicles or cars passing through the gate. It is very important to design an intelligent gate to control the flow of entered people or vehicles to the premises. The gate system should have capabilities to control the gate, where only specified vehicles or cars are allowed to enter the premises. The gate will open when the known vehicles are identified. The gate will not open if unauthorized vehicles try to pass. The system is a combination of mechanical, electrical and electronic components. It is one of the mechatronics engineering products. This intelligent gate system is suitable to be installed at universities, companies where only certain vehicles are allowed to enter. The list of certain vehicles must be stored in the database of the system. When the unknown vehicles try to pass through the gate, the gate will show a warning signal to the driver that they are unauthorized.

This paper predicts the effect of the user’s hand-hold position on the Total Isotropic Sensitivity (TIS) of GSM900/1800 mobile phone antennas of realistic in-use conditions, where different semi-realistic mobile phone models, i.e., candy bar and clamshell, as well as different antenna types, i.e., external and internal, are simulated using a FDTD-based platform. A semi-realistic hand model consisting of three tissues and the SAM head are used in simulations. The results show a considerable impact on TIS of the adopted mobile phone models owing to the user’s hand presence at different positions, where a maximum level of TIS is obtained while grasping the upper part of the mobile phone against head. Maximum TIS levels are recorded in talk position for mobile phones with external antenna and maximum differences in TIS levels due to the hand-hold alteration are recorded for clamshell-type phones.

Using Verilog Hardware Description Language to teach Computer Architecture Courses

This paper investigates both the computation accuracy (based on the power balance error) and the cost in terms of the number of FDTD-grid cells due to the artifact rotation for a cellular handset close to the user’s head. Two study cases are simulated to assess the EM coupling of a cellular handset and a MRI-based human head model at 900 MHz; firstly, both handset and head CAD models are aligned to the FDTD-grid, secondly, handset close to a rotated head in compliance with IEEE-1528 standard. A FDTD-based platform, SEMCAD-X, is used; where conventional and interactive gridder approaches are implemented to achieve the simulations. The results show that owing to the artifact rotation, the computation error may increase up to 30%, whereas, the required number of grid cells may increase up to 25%

As software systems grow, their complexity augments dramatically. In consequence their understandability and evolvability are becoming a difficult task, therefore a way to describe the architecture of software systems is becoming a must. The architecture of a software system can be described using either an architecture description language (ADL) or an object-oriented modeling language. In this article, we show how we can build a hybrid model, based on the two approaches, to describe the architecture of software systems. This approach profits from the advantages of the two approaches, i.e. the explicit presentation of functional aspects in object-oriented modeling and the explicit separation of competition (components) from interactions (connectors) in architectural description.

Significant challenges has been introduced for IP networks with the advent of new emerging applications, such as VOIP and E-Commerce, that require delivering quality guarantees. However, IP networks were originally designed to support best effort delivery only. Two Quality of Service (QoS) standard models, IntServ, DiffServ have been standardized by the Internet Engineering Task Force (IETF). Although these methods guarantee delivery, they have drawbacks such as complexity, restrictions of predefined classes and higher end-to-end delay. In this paper, a new QoS mathematical model has been proposed. This model is based on the principles of Network Calculus in which an incoming traffic flow is regulated by an arrival curve that upper bounds its rate. Then, this traffic flow is lower bounded and delayed by a service latency time at each node on its way to the destination node. The worst case end-to-end delay is derived and illustrated by a numerical example. The proposed model has achieved acceptable end-to-end delay compared with the other models.

This paper presents a novel cellular handset design with a bottom-mounted short loaded-whip antenna. This new handset design is modeled and simulated using a finite difference time-domain (FDTD)-based platform SEMCAD. The proposed handset is based on a current commercially available bar-phone type with a curvature shape, keypad positioned above the screen, and top-mounted antenna. The specific absorption rates (SARs) are determined computationally in the specific anthropomorphic mannequin (SAM) and anatomically correct model of a human head when exposed to the EM-field radiation of the proposed cellular handset and the handset with top-mounted antenna. The two cellular handsets are simulated to operate at both GSM standards, 900 MHz as well as 1800 MHz, having different antenna dimensions and intput power of 0.6 W and 0.125 W, respectively. The proposed human hand holding the two handset models is a semirealistic hand model consists of three tissues: skin, muscle, and bone. The simulations are conducted with handset positions based on the IEEE standard 1528-2003. The results show that the proposed handset has a significant improvement of antenna efficiency when it is hand-held close to head, as compared with the handset of top-mounted antenna. Also, the results show that a significant reduction of the induced SAR in the human head-tissues can be achieved with the proposed handset